세미나 및 이벤트
HSC Precise Machining Center Operational Volumetric Accuracy and Life Increasing
세미나 날짜
2005-06-16
작성자
임아주
작성일
2005-06-16
조회
2372
1. 제 목 : HSC Precise Machining Center Operational Volumetric Accuracy and Life Increasing
2. 연 사 : Professor Jerzy Jędrzejewski1 , Z. Kowal1, W. Modrzycki1
1Institute of Production Engineering and Automation -
Wroclaw University of Technology, Wroclaw, Poland
3. 일 시 : 2005년 6월 20일 월요일 오후 2시~3시
4. 장 소 : 서울대학교 신공학관 301동 1512호 세미나실
5. 내 용
A high-speed precise machining centre spindle unit model, based on two computation methods: the finite element method and the finite difference method is presented. The model based precise high speed spindle bearings unit behaviour and optimal operating characteristics estimation have been discussed. The modelling methods allow one to evaluate a design from thermal, stiffness and life cycle points of view. The behaviour of three machining centre headstocks with: an electrospindle on rolling bearings, a conventional spindle and an electrospindle on aerostatic bearings are modelled and analysing. The bearing units and cooling system influence on machine tool preciseness has been described as well as volumetric error estimation and compensation results.
6. 문 의 : 기계항공공학부 주 종 남 교수 (☎ 880-7136)
2. 연 사 : Professor Jerzy Jędrzejewski1 , Z. Kowal1, W. Modrzycki1
1Institute of Production Engineering and Automation -
Wroclaw University of Technology, Wroclaw, Poland
3. 일 시 : 2005년 6월 20일 월요일 오후 2시~3시
4. 장 소 : 서울대학교 신공학관 301동 1512호 세미나실
5. 내 용
A high-speed precise machining centre spindle unit model, based on two computation methods: the finite element method and the finite difference method is presented. The model based precise high speed spindle bearings unit behaviour and optimal operating characteristics estimation have been discussed. The modelling methods allow one to evaluate a design from thermal, stiffness and life cycle points of view. The behaviour of three machining centre headstocks with: an electrospindle on rolling bearings, a conventional spindle and an electrospindle on aerostatic bearings are modelled and analysing. The bearing units and cooling system influence on machine tool preciseness has been described as well as volumetric error estimation and compensation results.
6. 문 의 : 기계항공공학부 주 종 남 교수 (☎ 880-7136)
