세미나 및 이벤트
DESIGN OF A MACH 2.3 LUDWIEG TUBE
세미나 날짜
2003-03-18
작성자
정기훈
작성일
2003-03-18
조회
1272
1. 제 목 : DESIGN OF A MACH 2.3 LUDWIEG TUBE
2. 연 사 : Bahram Valiferdowsi / GALCIT, Caltech
3. 일 시 : 2003년 3월 25일 (화) 14:40 - 15:20
4. 장 소 : 서울대 신공학관(301동) 1512호 세미나실
5. 내 용 :
The Ludwieg Tube at the California Institute Technology in Pasadena, CA is a Mach 2.3 supersonic facility. The facility was finished in March 2001. It has several unique features, principal of which is the boundary layer suction system. An overview of the design and construction of the facility will be discussed. A summary of the experiments that have been conducted in the facility will be presented. These include verification and calibration of the flow, and drag measurements on blunted cones.
6. 약 력 :
- A.S. degree from Citrus College in Glendora, Machine Shop Technology
- Research Engineer of the T5 Hypervelocity Wind Tunnel
7. 문 의 : 기계항공공학부 정인석 교수 (☏ 880-7387)
2. 연 사 : Bahram Valiferdowsi / GALCIT, Caltech
3. 일 시 : 2003년 3월 25일 (화) 14:40 - 15:20
4. 장 소 : 서울대 신공학관(301동) 1512호 세미나실
5. 내 용 :
The Ludwieg Tube at the California Institute Technology in Pasadena, CA is a Mach 2.3 supersonic facility. The facility was finished in March 2001. It has several unique features, principal of which is the boundary layer suction system. An overview of the design and construction of the facility will be discussed. A summary of the experiments that have been conducted in the facility will be presented. These include verification and calibration of the flow, and drag measurements on blunted cones.
6. 약 력 :
- A.S. degree from Citrus College in Glendora, Machine Shop Technology
- Research Engineer of the T5 Hypervelocity Wind Tunnel
7. 문 의 : 기계항공공학부 정인석 교수 (☏ 880-7387)
